Send a drawing
Home›Industries›Doors

Industries

Custom Fasteners for Doors

Door assemblies load their fasteners in cycles. A hinge screw, a lock fixing or a pivot sees the same motion thousands of times, and the joint has to stay where it was set.

Send a drawing for this application

Parts from our records for doors

Real parts our records list for this industry. Dimensions and customer details are left out on purpose.

Set Screw

Set Screw

Head
headless
Form
machine thread
Material
SWRCH6A (≈SAE 1006)
Used in
doors and windows
Hex Head Screw with Gimlet Point

Hex Head Screw with Gimlet Point

Head
hex head
Form
self-tapping point, machine thread
Finish
Nickel Plated
Used in
doors and windows
Slotted Hex Head Screw with Pointed Tip and Washer

Slotted Hex Head Screw with Pointed Tip and Washer

Head
hex head, slot
Form
captive washer, self-tapping point, machine thread
Used in
doors and windows
Serrated Nut

Serrated Nut

Form
serrated, machine thread
Material
SWRCH8A (≈SAE 1008)
Used in
doors and windows
Hex Socket Low-Profile Head Barrel Nut

Hex Socket Low-Profile Head Barrel Nut

Head
flat head, hex socket
Form
machine thread
Used in
doors and windows
Hex Serrated Flange Head Coarse-Thread Screw

Hex Serrated Flange Head Coarse-Thread Screw

Head
hex head
Form
machine thread
Used in
doors and windows
Eccentric Step Pin

Eccentric Step Pin

Head
headless, hex socket
Form
stepped, eccentric
Used in
doors and windows
Knurled Pin

Knurled Pin

Form
knurled
Material
SUS201 (AISI 201)
Used in
doors and windows

Cases from this industry

Real jobs from our case records, with customer names and part numbers left out.

Hinge pins that turn without noise

A German hinge maker needed precision hinge pins. We made them from 45 carbon steel, drawn twice and centreless ground to a surface roughness of Ra 0.3 µm or better, so the hinge turns without noise, play or binding in assembly.

Machining · case E-002, anonymised

A dedicated gauge for one eccentric rivet

For an eccentric rivet used in glass-door hinges, we had a dedicated eccentric gauge made, checked concentricity on a 2D vision system and the hex with go/no-go gauges. The parts seat fully and stay tight in the hinge.

Inspection · case E-003, anonymised

Holding a profile by measuring all the way round

On the same glass-door hinge rivet, we held the profile to the customer's requirement by measuring it through 360° during production, reworked the die for a cleaner head and edge, and compared wire from several suppliers to choose the most consistent batch.

Die-mold · case E-137, anonymised

All cases

What this industry asks of a fastener

What the fastener has to do

  • Carry a hinge or pivot load that reverses every time the door moves, without the joint working loose.
  • Seat flush where hardware sits against the face of the door, so the leaf closes on its stop.
  • Hold in the substrate it is driven into — solid timber, particleboard, steel or aluminium behave differently.
  • Go in with a hand tool on site, at a torque an installer can reach without a powered driver.

What goes wrong

  • A shoulder or pivot that wears because the bearing length was set by the thread, not by a ground shank.
  • Heads that stand proud and foul the frame, because the seating diameter was taken from a catalogue part.
  • Exterior doors where the plating was specified for an indoor part and the head rusts first.
  • Hole position and depth that do not match the fixing set, so two parts never line up at the joint face.

Send a drawing

It reaches the person who quotes, not a shared inbox.

Each option opens an email with the questions we need answered already written in. Attach your file and send.

No mail app on this device? Write to zoe@tfscrew.com. What happens after you send it