Fastener materials we run
Steel, stainless, brass and zinc alloy grades that appear in our production records, with their usual international equivalents and standards. If yours is not listed, put it on the drawing and we will say whether we run it.
Equivalents are the usual nearest match, given for orientation; the drawing and the mill certificate decide.
| Grade | Usual equivalent | Standard |
|---|---|---|
| Cold-heading carbon steel | ||
| SWRCH10A | ≈SAE 1010 | JIS G 3507 |
| SWRCH18A also annealed | ≈SAE 1018 | JIS G 3507 |
| SWRCH22A also annealed | ≈SAE 1022 | JIS G 3507 |
| SWRCH6A | ≈SAE 1006 | JIS G 3507 |
| SWRCH8A also annealed | ≈SAE 1008 | JIS G 3507 |
| Cold-heading medium-carbon steel | ||
| SWRCH35K also annealed | ≈SAE 1035 | JIS G 3507 |
| SWRCH45K | ≈SAE 1045 | JIS G 3507 |
| SWRCH46K | ≈SAE 1046 | JIS G 3507 |
| SWRCH47K | ≈SAE 1047 | JIS G 3507 |
| SWRCH48K | ≈SAE 1048 | JIS G 3507 |
| Boron steel | ||
| 10B21 also annealed | SAE 10B21 | SAE J403 |
| 50BV30 | SAE 50BV30 | SAE J403 |
| Alloy steel | ||
| 40Cr | ≈SAE 5140 / EN 41Cr4 | GB/T 3077 |
| SCM435 | ≈SAE 4137 / ≈42CrMo4 | JIS G 4105 |
| Carbon steel | ||
| 1008 | SAE 1008 | SAE J403 |
| 1045 also annealed | SAE 1045 | SAE J403 |
| 20# | ≈SAE 1020 | GB/T 699 |
| Q235 | ≈SAE 1015–1020 | GB/T 700 |
| Free-cutting steel | ||
| 1215 | SAE 1215 | SAE J403 |
| 12L14 | SAE 12L14 | SAE J403 |
| Stainless steel | ||
| SUS201 | AISI 201 | JIS G 4303 |
| SUS304 | AISI 304 / EN 1.4301 / ISO 3506 A2 | JIS G 4303 |
| SUS420 | AISI 420 | JIS G 4303 |
| SUS430 | AISI 430 | JIS G 4303 |
| Brass | ||
| H65 | CuZn35 / ≈C26800 | GB/T 5231 |
| H68 | CuZn32 / ≈C26000 | GB/T 5231 |
| HPb59-1 | ≈CuZn40Pb2 / C37700 | GB/T 5231 |
| Zinc alloy | ||
| ZAMAK 3 | ZAMAK 3 / ZnAl4 | ASTM B86 |
| ZAMAK 5 | ZAMAK 5 / ZnAl4Cu1 | ASTM B86 |
| Carbon steel sheet and strip | ||
| SPCC | ≈AISI 1008–1010 | JIS G 3141 |
| Tool steel | ||
| S2 | ASTM A681 S2 | ASTM A681 |